Chimney Repair
Chimney Masonry Repair in Huntington, NY
Repointing, crown repair, flashing and full rebuilds across Huntington. This is the masonry side of a chimney: the brick, the mortar and the waterproofing.
What we don’t do: flue sweeping, lining, relining, or appliance work. That’s a different trade with a different certification. If your problem is inside the flue we’ll tell you and point you elsewhere rather than take the job.
The ground under Huntington
Huntington is north shore, and the furthest west we work. The ground is glacial moraine: till, unsorted and dense, holding water rather than shedding it. If you’ve moved up here from south of the ridge, the difference is real: down there the enemy is settlement into loose sand, up here it’s water.
Ground type matters less for chimney work than for anything else on this list. What does apply on the north shore is exposure: properties on higher ground and open sites take more weather on the chimney, which is the most exposed masonry on any house. Crowns and flashing fail sooner where the wind drives rain at them.
How we do the work
Every common chimney fault traces back to water getting into masonry and freezing.
Failed crown. The concrete cap on top. Thin, flat crowns crack early, and water then runs straight down inside the brickwork. The most common cause of chimney deterioration, and the cheapest thing to fix if it’s caught.
Open mortar joints. Mortar is sacrificial. It’s meant to wear before the brick does. Once joints are recessed, soft or missing, water gets behind the face.
Spalling brick. Faces popping off. Water that got in, froze, and pushed the face away. Spalled brick can’t be repaired; it gets cut out and replaced.
Failed flashing. Where the chimney meets the roof. Shows up as a ceiling stain, so it often gets diagnosed as a roof leak.
What we do: cut out joints to depth and repoint with mortar matched to the existing masonry; rebuild crowns with a proper overhang and drip edge; replace spalled units; re-flash at the roof line; and where appropriate apply a breathable masonry sealer: a film-forming sealer traps moisture inside the brick and accelerates the damage it’s meant to prevent.
What moves the price in Huntington
Slope and distance both matter here. Sloping sites mean retaining work and level platforms before any surface can exist, which puts more of the cost into excavation and structure. And Huntington is the western end of our range, so we block-schedule work here rather than running single jobs. That means a little more lead time than the central towns, and it’s worth asking early if you have a date in mind. We’d rather say that up front than move a schedule later.
Local rules
Huntington is in the Town of Huntington. Retaining walls are the permission most likely to apply, because sloping sites reach the height threshold far more often than flat ones.
What we’ll do regardless: tell you what applies before you sign, not after we’ve started.
Why this crew
The person who quotes the job is on the crew that runs it, and the quote states the base depth, which is the line worth comparing across any estimates you’re holding.
ICPI certified, Techo-Bloc Pro, A+ with the BBB, trading since 2017, working out of a yard on Horseblock Road in Medford.
Frequently asked questions
How do I know if it’s the chimney or the roof?
Often you can’t tell from inside, because failed flashing and a failed crown produce the same ceiling stain. That’s why we look at it rather than diagnose it over the phone.
Will the new mortar match?
New mortar is always brighter than sixty-year-old mortar and weathers in over a season or two. We can tint to get closer, and on a partial repoint that’s usually worth doing.
You’re based in Medford. Do you actually work in Huntington?
Yes, regularly. It’s the western end of our area, so we schedule it in blocks rather than as one-offs. Call and we’ll tell you honestly what the timing looks like.