Masonry Services
Masonry Contractor in Huntington, NY
Brick, block and natural stone across Huntington. New work and repair: piers, veneer, garden walls, steps, chimneys and the repointing that keeps all of it standing.
The ground under Huntington
Huntington is north shore, and the furthest west we work. The ground is glacial moraine: till, unsorted and dense, holding water rather than shedding it. If you’ve moved up here from south of the ridge, the difference is real: down there the enemy is settlement into loose sand, up here it’s water.
Ground conditions affect masonry mainly through movement. Till heaves with frost, and a pier or garden wall on a shallow footing will lift and drop with the seasons. Stepped diagonal cracking through the joints is the signature. Repointing that without addressing the footing means repointing it again.
How we do the work
Repointing, and why the mortar mix matters. Mortar is meant to be the weakest part of a wall. It’s sacrificial: it absorbs movement, carries moisture out of the masonry, and wears before the brick does. Mortar is cheap to replace and brick is not.
Use a mortar harder than the brick and you invert that. The joint stops giving, the brick takes the movement instead, and the faces start popping off. On older, softer brick a modern high-cement mortar can do more damage in a decade than the previous fifty years of weather.
Doing it properly means joints cut out to a real depth rather than skimmed, dust cleaned out, masonry dampened, mortar packed in lifts, and the joint tooled to match the original profile. Smearing new mortar over the face of open joints is not repointing: it looks finished for about eighteen months.
What else we build: piers and columns, brick and stone veneer, freestanding garden and seating walls, steps, and repair to cracked, spalled or settled masonry.
What we don’t do: structural foundation work or anything load-bearing that needs an engineer’s design. If your masonry problem is a symptom of the building moving, you need an engineer first and a mason second, and we’ll say so.
What moves the price in Huntington
Slope and distance both matter here. Sloping sites mean retaining work and level platforms before any surface can exist, which puts more of the cost into excavation and structure. And Huntington is the western end of our range, so we block-schedule work here rather than running single jobs. That means a little more lead time than the central towns, and it’s worth asking early if you have a date in mind. We’d rather say that up front than move a schedule later.
Local rules
Huntington is in the Town of Huntington. Retaining walls are the permission most likely to apply, because sloping sites reach the height threshold far more often than flat ones.
What we’ll do regardless: tell you what applies before you sign, not after we’ve started.
Why this crew
The person who quotes the job is on the crew that runs it, and the quote states the base depth, which is the line worth comparing across any estimates you’re holding.
ICPI certified, Techo-Bloc Pro, A+ with the BBB, trading since 2017, working out of a yard on Horseblock Road in Medford.
Frequently asked questions
Is repointing worth it, or should I rebuild?
Repointing works when the units are sound and the joints have failed. When brick faces are spalling across an area, or a section has moved, rebuilding is the honest answer.
Do you work in winter?
Mortar needs temperatures above a certain point to cure properly. We’ll tell you if a job needs to wait rather than lay mortar that won’t set.
You’re based in Medford. Do you actually work in Huntington?
Yes, regularly. It’s the western end of our area, so we schedule it in blocks rather than as one-offs. Call and we’ll tell you honestly what the timing looks like.