Patio Construction Service
Enhance your outdoor living with custom patios by Island Driveways & Patios, Inc., blending style, durability, and functionality.
Paver Patio Construction in Hampton Bays, NY
Concrete paver, natural stone and brick patios across Hampton Bays. Excavated to depth, based in compacted lifts, pitched so the water leaves, and edged so the perimeter stays where we put it.
The ground under Hampton Bays
Hampton Bays is surrounded by water: Peconic Bay to the north, Shinnecock and Tiana bays to the south, with barrier beach beyond. Roughly a third of the hamlet’s area is water, and that defines the ground: coastal sand, free-draining to a fault, and on properties near the water sitting over a high water table that limits excavation depth.
Then there’s salt, which is the thing that genuinely makes Hampton Bays different from everywhere else we work.
For a patio, coastal sand drains superbly and holds shape poorly, so compaction discipline matters more here than almost anywhere. Where the water table is close there is less depth to work with before the base is sitting wet, and a base in water won’t stay compacted. Salt also attacks the metal in edge restraint fixings: worth specifying for.
How we do the work
Excavate. Subgrade cut to depth, checked and compacted before anything goes back in.
Base. Aggregate placed and compacted in lifts. Open-graded or dense-graded depending on the site and how water needs to move through it.
Bedding. Screeded to a consistent thickness. This is a setting layer, not a levelling layer : using thick bedding to correct a poor base is the shortcut that always shows within a year.
Lay to pattern. Cut cleanly at the edges and around obstructions rather than gapped and filled with mortar.
Edge restraint. Fixed into the base around the full perimeter. This is what makes interlocking pavers interlock. Without it the outer courses walk outward under load and frost, the joints open across the whole field, and the patio comes apart from the edges in.
Joint sand. Polymeric, swept, vibrated and set. Then a final compaction pass.
What moves the price in Hampton Bays
Specification for salt costs more here and is worth paying for. Stainless grades that perform perfectly ten miles inland will pit and streak within a couple of seasons in marine air, so anything with metal in it, such as fixings, edge restraint, appliances and railings, gets specified for coastal exposure. Distance and season are the other two: Hampton Bays is the eastern end of our range and we block-schedule it, and on the many seasonal properties here the shoulder seasons are easier to book and less disruptive.
Local rules
Hampton Bays is in the Town of Southampton: a different authority from every other town we cover, with its own requirements. Waterfront and near-waterfront properties are where this matters most: coastal and wetlands regulation can apply to work that would be unremarkable inland.
What we’ll do regardless: tell you what applies before you sign, not after we’ve started.
Why this crew
The person who quotes the job is on the crew that runs it, and the quote states the base depth, which is the line worth comparing across any estimates you’re holding.
ICPI certified, Techo-Bloc Pro, A+ with the BBB, trading since 2017, working out of a yard on Horseblock Road in Medford.
Frequently asked questions
How long does a patio take?
Most residential patios are three to five days on site. The majority of that is excavation and base: laying the pavers is the quick part and the part that looks like progress.
Will it settle?
A properly based and compacted patio shouldn’t. Minor movement at the very edges over years is normal and correctable. Dishing in the middle is base failure, not settling.
Can you work while I’m not at the property?
Regularly: a good proportion of Hampton Bays work is on seasonal properties. We agree how you want progress shared, usually photographs at each stage, and a point at which you sign off.