Asphalt Driveways
Transform your property with high-quality asphalt driveway paving by Island Driveways & Patios, Inc., offering durability, style, and functionality.
Asphalt Driveway Paving in Commack, NY
New driveways, full replacements and resurfacing across Commack: excavated to depth, based properly, and compacted in lifts rather than rolled once and called finished.
The ground under Commack
Commack sits north-central, on moraine rather than outwash: glacial till, with sand, gravel, silt and clay deposited together and left unsorted. Denser and much slower to drain than the clean sand south of the ridge.
For a driveway, till is the frost-heave ground. Water held underneath freezes, expands, and lifts the surface, and the give-away is a crack that reappears in exactly the same place every spring however many times it’s patched. Patching addresses the crack and does nothing about the water. Drainage under the surface is what fixes it.
How we do the work
Excavation. Old surface out, subgrade cut to depth. If the existing driveway is coming up, it comes up: we don’t lay new asphalt over failed material to save a day.
Base. Compacted aggregate, placed and compacted in lifts rather than dumped to depth and rolled once. Depth is set by what the driveway carries; a car-only residential drive and one that takes a truck are not the same specification.
Asphalt. Either a single course or a binder-and-top-course build depending on the job. The binder carries the load, the top course gives the finish and sheds water. Rolled while hot: asphalt that cools before compaction never reaches density and ravels at the edges within a couple of seasons.
Pitch and edges. Water leaves the driveway, and it leaves it somewhere sensible rather than into the garage or across the neighbour’s line. Edges get a proper shoulder so the asphalt isn’t sitting on air.
What moves the price in Commack
Lot size is the Commack variable. Larger properties and long driveways mean cost scales with area rather than frontage, and the price gap between materials widens sharply at that scale: a difference of a dollar or two per square foot is trivial on a short drive and substantial on a long one. On larger jobs phasing is realistic, and we’ll price it both ways if that helps.
Local rules
Commack is split between two municipalities: part in the Town of Huntington, part in the Town of Smithtown. The boundary runs through the hamlet, and which town you’re in decides which office and which rules apply. We establish it from your address before quoting.
What we’ll do regardless: tell you what applies before you sign, not after we’ve started.
Why this crew
The person who quotes the job is on the crew that runs it, and the quote states the base depth, which is the line worth comparing across any estimates you’re holding.
ICPI certified, Techo-Bloc Pro, A+ with the BBB, trading since 2017, working out of a yard on Horseblock Road in Medford.
Frequently asked questions
How long does a driveway take?
Most residential driveways are one to two days on site: excavation and base on day one, paving on day two. Larger or awkward-access properties run longer, and we’ll say so at the estimate rather than on the morning of day three.
When can I park on it?
About 48 hours in warm weather, longer if it’s cool. It carries on curing over the following few months, so avoid sharp turning with the wheels stationary and don’t put a trailer jack or bike stand on it without a pad.
Is my property in Huntington or Smithtown?
Commack straddles both. We’ll confirm from your address at the estimate: it decides which permit office applies.